MINI Hardtop 2 Door lug nut torque
MINI Hardtop 2 Door owner’s manuals give 101 lb-ft (140 N·m) for 2014–2025, 2020–2024 (SE Electric), 103.3 lb-ft (140 N·m) for 2007–2013, 88.5 lb-ft (120 N·m) for 2003–2006 and 72 lb-ft (100 N·m) for 2002. Check which applies to yours. Tighten them in a star pattern with a torque wrench.
Sources checked
Wheel bolt torque, 2014–2025, 2020–2024 (SE Electric)
101lb-ft140N·m
- As printed
- “The tightening torque is 101 lbs ft/140 Nm.”
MINI Hardtop 2 Door lug nut torque by model year
| Model year | Version | Torque | Manual page |
|---|---|---|---|
| 2025 | All | 101 lb-ft (140 N·m) | PDF page 319 |
| 2023–2024 | All | 101 lb-ft (140 N·m) | PDF page 269 |
| 2023–2024 | SE Electric | 101 lb-ft (140 N·m) | PDF page 255 |
| 2022 | All | 101 lb-ft (140 N·m) | PDF page 265 |
| 2022 | SE Electric | 101 lb-ft (140 N·m) | PDF page 254 |
| 2021 | All | 101 lb-ft (140 N·m) | PDF page 270 |
| 2021 | SE Electric | 101 lb-ft (140 N·m) | PDF page 242 |
| 2020 | All | 101 lb-ft (140 N·m) | PDF page 266 |
| 2020 | SE Electric | 101 lb-ft (140 N·m) | PDF page 242 |
| 2019 | All | 101 lb-ft (140 N·m) | PDF page 265 |
| 2018 | All | 101 lb-ft (140 N·m) | PDF page 221 |
| 2017 | All | 101 lb-ft (140 N·m) | PDF page 208 |
| 2016 | All | 101 lb-ft (140 N·m) | PDF page 211 |
| 2015 | All | 101 lb-ft (140 N·m) | PDF page 212 |
| 2014 | All | 101 lb-ft (140 N·m) | PDF page 198 |
| 2013 | All | 103.3 lb-ft (140 N·m) | PDF page 230 |
| 2012 | All | 103.3 lb-ft (140 N·m) | PDF page 166 |
| 2011 | All | 103.3 lb-ft (140 N·m) | PDF page 169 |
| 2010 | All | 103.3 lb-ft (140 N·m) | PDF page 136 |
| 2009 | All | 103.3 lb-ft (140 N·m) | PDF page 137 |
| 2008 | All | 103.3 lb-ft (140 N·m) | PDF page 127 |
| 2007 | All | 103.3 lb-ft (140 N·m) | PDF page 112 |
| 2006 | All | 88.5 lb-ft (120 N·m) | PDF page 136 |
| 2005 | All | 88.5 lb-ft (120 N·m) | PDF page 130 |
| 2004 | All | 88.5 lb-ft (120 N·m) | PDF page 122 |
| 2003 | All | 88.5 lb-ft (120 N·m) | PDF page 117 |
| 2002 | All | 72 lb-ft (100 N·m) | PDF page 111 |
Read on MINI’s own site on October 29, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.
How to tighten them
- Clean any dirt or rust off the bolts and the wheel’s mounting face. Don’t oil them unless the manual says to.
- Thread every bolt in by hand until it seats against the wheel.
- Lower the vehicle so the tire takes its weight, and set a torque wrench to the value for your model year in the table above.
- Tighten the bolts in a star pattern, going around two or three times, until the wrench clicks on every bolt.
- Check the torque again after a short drive if your manual says to.
What the MINI manual adds
- Tighten the lug bolts crosswise.
- Tighten the lug bolts in a diagonal pattern.
More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Wheels held on by bolts, and how they’re fitted: lug nuts vs wheel bolts.
Other MINI models
- MINI Clubman101 or 103.3 lb-ft, by model year, 2008–2014, 2016, 2018–2024
- MINI Convertible88.5, 101 or 103.3 lb-ft, by model year, 2005–2025
- MINI Countryman101 or 103.3 lb-ft, by model year, 2011–2013, 2018–2025
- MINI Coupe103.3 lb-ft (140 N·m), 2012–2015
- MINI Hardtop 4 Door101 lb-ft (140 N·m), 2015–2025
- MINI John Cooper Works GP101 lb-ft (140 N·m), 2021
- MINI Paceman103.3 lb-ft (140 N·m), 2013
- MINI Roadster103.3 lb-ft (140 N·m), 2012–2015
Questions
What is the lug nut torque on a MINI Hardtop 2 Door?
101 lb-ft (140 N·m) for 2014–2025, 2020–2024 (SE Electric); 103.3 lb-ft (140 N·m) for 2007–2013; 88.5 lb-ft (120 N·m) for 2003–2006; 72 lb-ft (100 N·m) for 2002, as printed in MINI’s owner’s manuals (2002–2025).
Can I use an impact wrench?
Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.
Should I oil the wheel bolts?
Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the bolt further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.