Chevrolet Malibu lug nut torque

Chevrolet Malibu owner’s manuals give 100 lb-ft (140 N·m) for 2007–2012, 2016–2025 and 110 lb-ft (150 N·m) for 2013–2015, 2016 (Malibu Limited). Check which applies to yours. Tighten them in a star pattern with a torque wrench.

Sources checked

Wheel nut torque, 2007–2012, 2016–2025

100lb-ft140N·m

04080120050100150ft-lbN·m
As printed
“Wheel Nut Torque 140 N·m 100 lb ft”
Source
2025 Chevrolet Malibu Owner Manual: Capacities and Specifications, PDF page 308

Chevrolet Malibu lug nut torque by model year

Model yearVersionTorqueManual page
2025All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 308
2024All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 302
2023All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 299
2022All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 321
2021All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 319
2020All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 318
2019All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 344
2018All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 374
2017All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 380
2016All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 383
2016Malibu Limited110 lb-ft (150 N·m)Capacities and Specifications, PDF page 324
2015All110 lb-ft (150 N·m)Capacities and Specifications, PDF page 357
2014All110 lb-ft (150 N·m)Capacities and Specifications, PDF page 387
2013All110 lb-ft (150 N·m)Capacities and Specifications, PDF page 391
2012All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 355
2011All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 351
2010All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 395
2009All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 360
2008All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 352
2007All100 lb-ft (140 N·m)Capacities and Specifications, PDF page 456

Read on Chevrolet’s own site between October 14, 2026 and October 19, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.

How to tighten them

  1. Clean any dirt or rust off the studs, the nuts and the wheel’s mounting face. Don’t oil them unless the manual says to.
  2. Thread every nut on by hand until it seats against the wheel.
  3. Lower the vehicle so the tire takes its weight, and set a torque wrench to the value for your model year and version in the table above.
  4. Tighten the nuts in a star pattern, going around two or three times, until the wrench clicks on every nut.
  5. Check the torque again after a short drive if your manual says to.

More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Nuts or bolts, car by car: lug nuts vs wheel bolts.

Other Chevrolet models

Questions

What is the lug nut torque on a Chevrolet Malibu?

100 lb-ft (140 N·m) for 2007–2012, 2016–2025; 110 lb-ft (150 N·m) for 2013–2015, 2016 (Malibu Limited), as printed in Chevrolet’s owner’s manuals (2007–2025).

Can I use an impact wrench?

Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.

Should I oil the studs?

Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the stud further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.