Land Rover Range Rover lug nut torque

Land Rover Range Rover owner’s manuals give 110 lb-ft (150 N·m) for 2022–2027 (New Range Rover) and 103 lb-ft (140 N·m) for 2016–2022. Check which applies to yours. Tighten them in a star pattern with a torque wrench.

Sources checked

Wheel bolt torque, 2022–2027 (New Range Rover)

110lb-ft150N·m

04080120050100150ft-lbN·m
As printed
“110 lb.ft (150 Nm)”
Source
2027 Range Rover iGuide Online handbook (Land Rover, US): Wheel bolt torque

Land Rover Range Rover lug nut torque by model year

Model yearVersionTorqueManual page
2027New Range Rover110 lb-ft (150 N·m)Wheel bolt torque
2026New Range Rover110 lb-ft (150 N·m)Wheel changing
2025New Range Rover110 lb-ft (150 N·m)Wheel changing
2024New Range Rover110 lb-ft (150 N·m)Wheel changing
2023New Range Rover110 lb-ft (150 N·m)Wheel changing
2022All103 lb-ft (140 N·m)Wheel changing
2022New Range Rover110 lb-ft (150 N·m)Wheel changing
2021All103 lb-ft (140 N·m)Wheel changing
2020All103 lb-ft (140 N·m)Wheel changing
2019All103 lb-ft (140 N·m)Wheel changing
2018All140 N·m (103 lb-ft converted)Wheel changing
2017All140 N·m (103 lb-ft converted)Wheel changing
2016All140 N·m (103 lb-ft converted)Wheel changing

A unit marked converted isn’t printed in that manual, or is printed wrongly: it’s worked out from one the manual prints. Read on Land Rover’s own site on October 29, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.

How to tighten them

  1. Clean any dirt or rust off the bolts and the wheel’s mounting face. Don’t oil them unless the manual says to.
  2. Thread every bolt in by hand until it seats against the wheel.
  3. Lower the vehicle so the tire takes its weight, and set a torque wrench to the value for your model year and version in the table above.
  4. Tighten the bolts in a star pattern, going around two or three times, until the wrench clicks on every bolt.
  5. Check the torque again after a short drive if your manual says to.

What the Land Rover manual adds

  • With all of the wheels on the ground and the jack removed, fully tighten the lug bolts.
  • With all of the wheels on the ground, and the jack removed, fully tighten the lug nuts.
  • With all of the wheels on the ground, and the jack removed, fully tighten the wheel nuts.

More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Wheels held on by bolts, and how they’re fitted: lug nuts vs wheel bolts.

Other Land Rover models

Questions

What is the lug nut torque on a Land Rover Range Rover?

110 lb-ft (150 N·m) for 2022–2027 (New Range Rover); 103 lb-ft (140 N·m) for 2016–2022, from Land Rover’s owner’s manuals (2016–2027).

Can I use an impact wrench?

Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.

Should I oil the wheel bolts?

Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the bolt further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.