Ford Transit lug nut torque

Ford Transit owner’s manuals give 150 lb-ft (204 N·m) for 2020–2022, 2024, 2027 and 148 lb-ft (200 N·m) for 2015–2019. Check which applies to yours. Tighten them in a star pattern with a torque wrench.

Sources checked

Wheel nut torque, 2020–2022, 2024, 2027

150lb-ft204N·m

0501001502000100200300ft-lbN·m
As printed
“M14 x 1.5: 150 (204)”
Stud thread
M14 x 1.5
Source
2027 Transit Owner's Manual (Ford): Wheel Nuts

Ford Transit lug nut torque by model year

Model yearTorqueManual page
2027150 lb-ft (204 N·m)Wheel Nuts
2024150 lb-ft (204 N·m)Wheels and Tires, PDF page 455
2022150 lb-ft (204 N·m)Wheels and Tires, PDF page 451
2021150 lb-ft (204 N·m)Wheels and Tires, PDF page 354
2020150 lb-ft (204 N·m)Lug Nuts
2019148 lb-ft (200 N·m)Wheels and Tires, PDF page 308
2018148 lb-ft (200 N·m)Technical Specifications
2017148 lb-ft (200 N·m)Technical Specifications
2016148 lb-ft (200 N·m)Technical Specifications
2015148 lb-ft (200 N·m)Technical Specifications

Read on Ford’s own site between October 19, 2026 and October 22, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.

How to tighten them

  1. Clean any dirt or rust off the studs, the nuts and the wheel’s mounting face. Don’t oil them unless the manual says to.
  2. Thread every nut on by hand until it seats against the wheel.
  3. Lower the vehicle so the tire takes its weight, and set a torque wrench to the value for your model year in the table above.
  4. Tighten the nuts in a star pattern, going around two or three times, until the wrench clicks on every nut.
  5. Check the torque again after a short drive if your manual says to.

What the Ford manual adds

  • Torque specifications are for nut and bolt threads free of dirt and rust.
  • Use only Ford recommended replacement fasteners.
  • Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance, for example tire rotation, changing a flat tire or wheel removal.

More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Nuts or bolts, car by car: lug nuts vs wheel bolts.

Other Ford models

Questions

What is the lug nut torque on a Ford Transit?

150 lb-ft (204 N·m) for 2020–2022, 2024, 2027; 148 lb-ft (200 N·m) for 2015–2019, as printed in Ford’s owner’s manuals (2015–2022, 2024, 2027).

Can I use an impact wrench?

Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.

Should I oil the studs?

Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the stud further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.