Porsche Taycan lug nut torque

How to tighten them

1. Clean any dirt or rust off the bolts and the wheel’s mounting face. Don’t oil them unless the manual says to.
2. Thread every bolt in by hand until it seats against the wheel.
3. Lower the vehicle so the tire takes its weight, and set a torque wrench to the value for your model year and version in the table above.
4. Tighten the bolts in a star pattern, going around two or three times, until the wrench clicks on every bolt.
5. Check the torque again after a short drive if your manual says to.

What the Porsche manual adds

• Immediately after a wheel change, use a torque wrench to check the prescribed tightening torque of the wheel bolts (160 Nm).

More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Wheels held on by bolts, and how they’re fitted: lug nuts vs wheel bolts.

Other Porsche models

• Porsche 718118 or 443 lb-ft, by version, 2017–2025
• Porsche 911118, 119, 369, 443 or 444 lb-ft, by year and version, 2013–2027
• Porsche 918 Spyder479 lb-ft (650 N·m), 2015
• Porsche Boxster118 lb-ft (160 N·m), 2013–2016
• Porsche Cayenne118 or 119 lb-ft, by year and version, 2013–2027
• Porsche Cayenne Electric160 N·m (118 lb-ft converted), 2026
• Porsche Cayman118 lb-ft (160 N·m), 2014–2016
• Porsche Macan118 lb-ft (160 N·m), 2015–2026
• Porsche Macan Electric118 (converted) or 119 lb-ft, by model year, 2024–2027
• Porsche Panamera118, 119 or 443 lb-ft, by year and version, 2013–2027

Questions