Volvo V90 Cross Country lug nut torque

Volvo V90 Cross Country owner’s manuals give 118 lb-ft (160 N·m) for 2022–2025 and 103 lb-ft (140 N·m) for 2017–2021. Check which applies to yours. Tighten them in a star pattern with a torque wrench.

Sources checked

Wheel bolt torque, 2022–2025

118lb-ft160N·m

040801201600100200ft-lbN·m
As printed
“Tighten to 160 Nm (118 lb-ft).”
Source
2025 V90 Cross Country User Manual (Volvo): PDF page 329

Volvo V90 Cross Country lug nut torque by model year

Model yearTorqueManual page
2025118 lb-ft (160 N·m)PDF page 329
2024118 lb-ft (160 N·m)PDF page 329
2023118 lb-ft (160 N·m)PDF page 329
2022118 lb-ft (160 N·m)PDF page 331
2021103 lb-ft (140 N·m)PDF page 865
2020103 lb-ft (140 N·m)PDF page 537
2019103 lb-ft (140 N·m)PDF page 529
2018103 lb-ft (140 N·m)PDF page 545
2017103 lb-ft (140 N·m)PDF page 460

Read on Volvo’s own site on October 23, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.

How to tighten them

  1. Clean any dirt or rust off the bolts and the wheel’s mounting face. Don’t oil them unless the manual says to.
  2. Thread every bolt in by hand until it seats against the wheel.
  3. Lower the vehicle so the tire takes its weight, and set a torque wrench to the value for your model year in the table above.
  4. Tighten the bolts in a star pattern, going around two or three times, until the wrench clicks on every bolt.
  5. Check the torque again after a short drive if your manual says to.

More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Wheels held on by bolts, and how they’re fitted: lug nuts vs wheel bolts.

Other Volvo models

Questions

What is the lug nut torque on a Volvo V90 Cross Country?

118 lb-ft (160 N·m) for 2022–2025; 103 lb-ft (140 N·m) for 2017–2021, as printed in Volvo’s owner’s manuals (2017–2025).

Can I use an impact wrench?

Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.

Should I oil the wheel bolts?

Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the bolt further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.