Nissan Maxima lug nut torque

Nissan Maxima owner’s manuals give 83 lb-ft (113 N·m) for 2019–2023 and 83 lb-ft (112 N·m) for 2013–2014, 2016–2018. Check which applies to yours. Tighten them in a star pattern with a torque wrench.

Sources checked

Wheel nut torque, 2019–2023

83lb-ft113N·m

04080120050100150ft-lbN·m
As printed
“Wheel nut tightening torque: 83 ft-lb (113 N·m)”
Source
2023 Maxima Owner's Manual (Nissan): PDF page 368

Nissan Maxima lug nut torque by model year

Model yearTorqueManual page
202383 lb-ft (113 N·m)PDF page 368
202283 lb-ft (113 N·m)PDF page 366
202183 lb-ft (113 N·m)PDF page 360
202083 lb-ft (113 N·m)PDF page 394
201983 lb-ft (113 N·m)PDF page 388
201883 lb-ft (112 N·m)PDF page 327
201783 lb-ft (112 N·m)PDF page 311
201683 lb-ft (112 N·m)PDF page 298
201483 lb-ft (112 N·m)PDF page 336
201383 lb-ft (112 N·m)PDF page 348

Read on Nissan’s own site on October 19, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.

How to tighten them

  1. Clean any dirt or rust off the studs, the nuts and the wheel’s mounting face. Don’t oil them unless the manual says to.
  2. Thread every nut on by hand until it seats against the wheel.
  3. Lower the vehicle so the tire takes its weight, and set a torque wrench to the value for your model year in the table above.
  4. Tighten the nuts in a star pattern, going around two or three times, until the wrench clicks on every nut.
  5. Check the torque again after a short drive if your manual says to.

More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Nuts or bolts, car by car: lug nuts vs wheel bolts.

Other Nissan models

Questions

What is the lug nut torque on a Nissan Maxima?

83 lb-ft (113 N·m) for 2019–2023; 83 lb-ft (112 N·m) for 2013–2014, 2016–2018, as printed in Nissan’s owner’s manuals (2013–2014, 2016–2023).

Can I use an impact wrench?

Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.

Should I oil the studs?

Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the stud further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.