Lincoln MKX lug nut torque

Lincoln MKX owner’s manuals give 162 lb-ft (220 N·m) for 2016–2018 and 100 lb-ft (135 N·m) for 2007–2015. Check which applies to yours. Tighten them in a star pattern with a torque wrench.

Sources checked

Wheel nut torque, 2016–2018

162lb-ft220N·m

0501001502000100200300ft-lbN·m
As printed
“M14 x 1.5: 162 lb.ft (220 Nm)”
Stud thread
M14 x 1.5
Source
2018 MKX Owner's Manual (Lincoln): Technical Specifications

Lincoln MKX lug nut torque by model year

Model yearTorqueManual page
2018162 lb-ft (220 N·m)Technical Specifications
2017162 lb-ft (220 N·m)Technical Specifications
2016162 lb-ft (220 N·m)Technical Specifications
2015100 lb-ft (135 N·m)Wheels and Tires, PDF page 315
2014100 lb-ft (135 N·m)Wheels and Tires, PDF page 315
2013100 lb-ft (135 N·m)Wheels and Tires, PDF page 320
2012100 lb-ft (135 N·m)Wheel Lug Nut Torque Specifications, PDF page 271
2011100 lb-ft (135 N·m)Wheel Lug Nut Torque Specifications, PDF page 267
2010100 lb-ft (135 N·m)Wheel Lug Nut Torque Specifications, PDF page 243
2009100 lb-ft (135 N·m)Wheel Lug Nut Torque Specifications, PDF page 240
2008100 lb-ft (135 N·m)Wheel Lug Nut Torque Specifications, PDF page 256
2007100 lb-ft (135 N·m)Wheel Lug Nut Torque Specifications, PDF page 251

Read on Lincoln’s own site between October 19, 2026 and October 24, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.

How to tighten them

  1. Clean any dirt or rust off the studs, the nuts and the wheel’s mounting face. Don’t oil them unless the manual says to.
  2. Thread every nut on by hand until it seats against the wheel.
  3. Lower the vehicle so the tire takes its weight, and set a torque wrench to the value for your model year in the table above.
  4. Tighten the nuts in a star pattern, going around two or three times, until the wrench clicks on every nut.
  5. Check the torque again after a short drive if your manual says to.

What the Lincoln manual adds

  • Torque specifications are for nut and bolt threads free of dirt and rust.
  • Use only our recommended replacement fasteners.
  • Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance (such as tire rotation, changing a flat tire, wheel removal).
  • Use only Ford recommended replacement fasteners.
  • Retighten the lug nuts to the specified torque within 100 miles (160 km) after any wheel disturbance (rotation, flat tire, wheel removal, etc.).

More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Nuts or bolts, car by car: lug nuts vs wheel bolts.

Other Lincoln models

Questions

What is the lug nut torque on a Lincoln MKX?

162 lb-ft (220 N·m) for 2016–2018; 100 lb-ft (135 N·m) for 2007–2015, as printed in Lincoln’s owner’s manuals (2007–2018).

Can I use an impact wrench?

Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.

Should I oil the studs?

Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the stud further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.