Lexus RX lug nut torque
Lexus RX owner’s manuals give 103 lb-ft (140 N·m) for 2023–2025 and 76 lb-ft (103 N·m) for 2022. Check which applies to yours. Tighten them in a star pattern with a torque wrench.
Sources checked
Wheel bolt torque, 2023–2025
103lb-ft140N·m14.3kgf·m
- As printed
- “Tightening torque:103 ft•lbf (140 N•m, 14.3 kgf•m)”
Lexus RX lug nut torque by model year
| Model year | Torque | Manual page |
|---|---|---|
| 2025 | 103 lb-ft (140 N·m) | If you have a flat tire |
| 2024 | 103 lb-ft (140 N·m) | If you have a flat tire |
| 2023 | 103 lb-ft (140 N·m) | If you have a flat tire |
| 2022 | 76 lb-ft (103 N·m) | If you have a flat tire |
Read on Lexus’s own site on October 26, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.
How to tighten them
- Clean any dirt or rust off the bolts and the wheel’s mounting face. Don’t oil them unless the manual says to.
- Thread every bolt in by hand until it seats against the wheel.
- Lower the vehicle so the tire takes its weight, and set a torque wrench to the value for your model year in the table above.
- Tighten the bolts in a star pattern, going around two or three times, until the wrench clicks on every bolt.
- Check the torque again after a short drive if your manual says to.
What the Lexus manual adds
- Securely tighten the wheel bolts two or three times in the order shown in the illustration using a wheel bolt wrench.
- After replacing a tire, check the tightening torque as soon as possible.
- Firmly tighten each wheel nut two or three times in the order shown in the illustration.
- Never use oil or grease on the wheel bolts or wheel nuts.
More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Wheels held on by bolts, and how they’re fitted: lug nuts vs wheel bolts.
Other Lexus models
Questions
What is the lug nut torque on a Lexus RX?
103 lb-ft (140 N·m) for 2023–2025; 76 lb-ft (103 N·m) for 2022, as printed in Lexus’s owner’s manuals (2022–2025).
Can I use an impact wrench?
Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.
Should I oil the wheel bolts?
Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the bolt further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.