Infiniti G Convertible lug nut torque
The 2013 Infiniti G Convertible takes 80 lb-ft (108 N·m) on its wheel nuts, according to its owner’s manual. Tighten them in a star pattern with a torque wrench.
Sources checked
Wheel nut torque
80lb-ft108N·m
- As printed
- “Wheel nut tightening torque: 80 ft-lb (108 N·m)”
Infiniti G Convertible lug nut torque by model year
| Model year | Torque | Manual page |
|---|---|---|
| 2013 | 80 lb-ft (108 N·m) | PDF page 368 |
Read on Infiniti’s own site on October 23, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.
How to tighten them
- Clean any dirt or rust off the studs, the nuts and the wheel’s mounting face. Don’t oil them unless the manual says to.
- Thread every nut on by hand until it seats against the wheel.
- Lower the vehicle so the tire takes its weight, and set a torque wrench to 80 lb-ft (108 N·m).
- Tighten the nuts in a star pattern, going around two or three times, until the wrench clicks on every nut.
- Check the torque again after a short drive if your manual says to.
More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Nuts or bolts, car by car: lug nuts vs wheel bolts.
Other Infiniti models
- Infiniti EX80 lb-ft (108 N·m), 2013
- Infiniti FX80 lb-ft (108 N·m), 2013
- Infiniti G Coupe80 lb-ft (108 N·m), 2013
- Infiniti G Sedan80 lb-ft (108 N·m), 2013
- Infiniti JX83 lb-ft (113 N·m), 2013
- Infiniti M80 lb-ft (108 N·m), 2013
- Infiniti M Hybrid80 lb-ft (108 N·m), 2013
- Infiniti Q4080 lb-ft (108 N·m), 2015
- Infiniti Q5080 lb-ft (108 N·m), 2014–2024
- Infiniti Q50 Hybrid80 lb-ft (108 N·m), 2014–2018
- Infiniti Q60 Convertible80 lb-ft (108 N·m), 2014–2015
- Infiniti Q60 Coupe80 lb-ft (108 N·m), 2014–2015, 2017–2022
- Infiniti Q7080 lb-ft (108 N·m), 2014–2019
- Infiniti Q70 Hybrid80 lb-ft (108 N·m), 2014–2018
- Infiniti QX3096 lb-ft (130 N·m), 2017–2019
- Infiniti QX5080 or 83 lb-ft, by model year, 2014–2017, 2019–2025
- Infiniti QX5583 lb-ft (113 N·m), 2022–2025
- Infiniti QX5698 lb-ft (133 N·m), 2013
- Infiniti QX6083 lb-ft (113 N·m), 2014–2020, 2022–2027
- Infiniti QX60 Hybrid83 lb-ft (113 N·m), 2014–2017
- Infiniti QX6583 lb-ft (113 N·m), 2027
- Infiniti QX7080 lb-ft (108 N·m), 2014–2017
- Infiniti QX8098 lb-ft (133 N·m), 2014–2027
Questions
What is the lug nut torque on a Infiniti G Convertible?
80 lb-ft (108 N·m), as printed in Infiniti’s owner’s manual (2013).
Can I use an impact wrench?
Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.
Should I oil the studs?
Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the stud further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.