Hyundai Nexo lug nut torque

The Hyundai Nexo takes a lug nut torque of 79–94 lb-ft (11–13 kgf·m; 107–127 N·m converted) on its wheel nuts; the 2019–2025 manuals all say the same. Tighten them in a star pattern with a torque wrench.

Sources checked

Wheel nut torque

79–94lb-ft107–127N·mconverted11–13kgf·m

04080120050100150ft-lbN·m

The manual gives a range: any setting inside it is within spec.

The manual prints the N·m as “07~127”; the N·m shown is worked out from the lb-ft (1 lb-ft = 1.356 N·m).

As printed
“Wheel Lug Nut Torque kgf•m (lbf•ft, N•m): 11~13 (79~94, 07~127)”
Source
Nexo 2025 Owner's Manual (Hyundai, US): Tires and Wheels, PDF page 564

Hyundai Nexo lug nut torque by model year

Model yearTorqueManual page
202579–94 lb-ft (107–127 N·m converted)Tires and Wheels, PDF page 564
202479–94 lb-ft (107–127 N·m converted)Tires and Wheels, PDF page 559
202379–94 lb-ft (107–127 N·m converted)Tires and Wheels, PDF page 546
202279–94 lb-ft (107–127 N·m converted)Tires and Wheels, PDF page 546
202179–94 lb-ft (107–127 N·m converted)Tires and Wheels, PDF page 544
202079–94 lb-ft (107–127 N·m converted)Tires and Wheels, PDF page 544
201979–94 lb-ft (107–127 N·m converted)Tires and Wheels, PDF page 543

A unit marked converted isn’t printed in that manual, or is printed wrongly: it’s worked out from one the manual prints. The 2019–2025 manuals print the N·m as “07~127”. Read on Hyundai’s own site on October 22, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.

How to tighten them

  1. Clean any dirt or rust off the studs, the nuts and the wheel’s mounting face. Don’t oil them unless the manual says to.
  2. Thread every nut on by hand until it seats against the wheel.
  3. Lower the vehicle so the tire takes its weight, and set a torque wrench to 79–94 lb-ft (107–127 N·m converted).
  4. Tighten the nuts in a star pattern, going around two or three times, until the wrench clicks on every nut.
  5. Check the torque again after a short drive if your manual says to.

More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Nuts or bolts, car by car: lug nuts vs wheel bolts.

Other Hyundai models

Questions

What is the lug nut torque on a Hyundai Nexo?

79–94 lb-ft (107–127 N·m converted), from Hyundai’s owner’s manuals (2019–2025).

Can I use an impact wrench?

Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.

Should I oil the studs?

Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the stud further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.