Honda Passport lug nut torque
Honda Passport owner’s manuals give 94 lb-ft (127 N·m) for 2019–2027 and 87 lb-ft (118 N·m) for 2000–2002. Check which applies to yours. Tighten them in a star pattern with a torque wrench.
Sources checked
Wheel nut torque, 2019–2027
94lb-ft127N·m13kgf·m
- As printed
- “Wheel nut torque: 94 lbf∙ft (127 N∙m, 13 kgf∙m)”
Honda Passport lug nut torque by model year
| Model year | Torque | Manual page |
|---|---|---|
| 2027 | 94 lb-ft (127 N·m) | If a Tire Goes Flat, PDF page 386 |
| 2026 | 94 lb-ft (127 N·m) | If a Tire Goes Flat, PDF page 394 |
| 2025 | 94 lb-ft (127 N·m) | If a Tire Goes Flat, PDF page 552 |
| 2024 | 94 lb-ft (127 N·m) | If a Tire Goes Flat, PDF page 551 |
| 2023 | 94 lb-ft (127 N·m) | If a Tire Goes Flat, PDF page 559 |
| 2022 | 94 lb-ft (127 N·m) | If a Tire Goes Flat, PDF page 558 |
| 2021 | 94 lb-ft (127 N·m) | If a Tire Goes Flat, PDF page 558 |
| 2020 | 94 lb-ft (127 N·m) | If a Tire Goes Flat, PDF page 620 |
| 2019 | 94 lb-ft (127 N·m) | If a Tire Goes Flat, PDF page 618 |
| 2002 | 87 lb-ft (118 N·m) | In Case of Emergency, PDF page 191 |
| 2001 | 87 lb-ft (118 N·m) | In Case of Emergency, PDF page 192 |
| 2000 | 87 lb-ft (118 N·m) | In Case of Emergency, PDF page 187 |
Read on Honda’s own site between October 21, 2026 and October 26, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.
How to tighten them
- Clean any dirt or rust off the studs, the nuts and the wheel’s mounting face. Don’t oil them unless the manual says to.
- Thread every nut on by hand until it seats against the wheel.
- Lower the vehicle so the tire takes its weight, and set a torque wrench to the value for your model year in the table above.
- Tighten the nuts in a star pattern, going around two or three times, until the wrench clicks on every nut.
- Check the torque again after a short drive if your manual says to.
What the Honda manual adds
- Tighten the wheel nuts in the order indicated in the image.
- Go around tightening the nuts two to three times in this order.
- Do not over tighten the wheel nuts by applying extra torque using your foot or a pipe.
- Lower the vehicle by turning the jack handle counterclockwise, then fully tighten the wheel nuts in a crisscross sequence by turning the wrench clockwise.
More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Nuts or bolts, car by car: lug nuts vs wheel bolts.
Other Honda models
- Honda Accord80 lb-ft (108 N·m), 2000–2026
- Honda Accord Hybrid80 lb-ft (108 N·m), 2005–2007
- Honda Civic80 or 94 lb-ft, by version, 2000–2027
- Honda Civic Hybrid80 lb-ft (108 N·m), 2003–2015
- Honda CR-V80 or 94 lb-ft, by year and version, 2000–2027
- Honda CR-Z80 lb-ft (108 N·m), 2011–2015
- Honda Crosstour80 lb-ft (108 N·m), 2012–2015
- Honda Element80 lb-ft (108 N·m), 2003–2011
- Honda Fit80 lb-ft (108 N·m), 2007, 2009–2013, 2015–2020
- Honda HR-V80 lb-ft (108 N·m), 2016–2027
- Honda Insight80 lb-ft (108 N·m), 2000–2006, 2010–2014, 2019–2022
- Honda Odyssey80 or 94 lb-ft, by model year, 2000–2027
- Honda Pilot80 or 94 lb-ft, by model year, 2003–2026
- Honda Prelude94 lb-ft (127 N·m), 2026–2027
- Honda Prologue140 lb-ft (190 N·m), 2024–2026
- Honda Ridgeline94 lb-ft (127 N·m), 2006–2009, 2011–2014, 2017–2026
Questions
What is the lug nut torque on a Honda Passport?
94 lb-ft (127 N·m) for 2019–2027; 87 lb-ft (118 N·m) for 2000–2002, as printed in Honda’s owner’s manuals (2000–2002, 2019–2027).
Can I use an impact wrench?
Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.
Should I oil the studs?
Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the stud further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.