Genesis Electrified G80 lug nut torque
The Genesis Electrified G80 takes a lug nut torque of 101–116 lb-ft (137–157 N·m, 14–16 kgf·m) on its wheel bolts; the 2023–2024, 2026 manuals all say the same. Tighten them in a star pattern with a torque wrench.
Sources checked
Wheel bolt torque
101–116lb-ft137–157N·m14–16kgf·m
The manual gives a range: any setting inside it is within spec.
- As printed
- “Wheel bolt torque lbf·ft (kgf·m, N·m): 101-116 (14-16, 137-157)”
Genesis Electrified G80 lug nut torque by model year
| Model year | Torque | Manual page |
|---|---|---|
| 2026 | 101–116 lb-ft (137–157 N·m) | Tires and Wheels |
| 2024 | 101–116 lb-ft (137–157 N·m) | Tires and wheels, PDF page 80 |
| 2023 | 101–116 lb-ft (137–157 N·m) | Tires and Wheels, PDF page 80 |
Read on Genesis’s own site on October 20, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.
How to tighten them
- Clean any dirt or rust off the bolts and the wheel’s mounting face. Don’t oil them unless the manual says to.
- Thread every bolt in by hand until it seats against the wheel.
- Lower the vehicle so the tire takes its weight, and set a torque wrench to 101–116 lb-ft (137–157 N·m).
- Tighten the bolts in a star pattern, going around two or three times, until the wrench clicks on every bolt.
- Check the torque again after a short drive if your manual says to.
More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Wheels held on by bolts, and how they’re fitted: lug nuts vs wheel bolts.
Other Genesis models
- Genesis Electrified GV70101–116 lb-ft (137–157 N·m), 2022–2026
- Genesis G7079–94 lb-ft (107–127 N·m), 2019–2026
- Genesis G80101–116 lb-ft (137–157 N·m), 2021–2027
- Genesis G90101–116 lb-ft (137–157 N·m), 2023–2026
- Genesis GV60101–116 lb-ft (137–157 N·m), 2023–2027
- Genesis GV70101–116 lb-ft (137–157 N·m), 2022–2026
- Genesis GV80101–116 lb-ft (137–157 N·m), 2021–2027
Questions
What is the lug nut torque on a Genesis Electrified G80?
101–116 lb-ft (137–157 N·m), as printed in Genesis’s owner’s manuals (2023–2024, 2026).
Can I use an impact wrench?
Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.
Should I oil the wheel bolts?
Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the bolt further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.