Cadillac Escalade lug nut torque
The Cadillac Escalade takes 140 lb-ft (190 N·m) on its wheel nuts; the 2007–2027 manuals all say the same. Tighten them in a star pattern with a torque wrench.
Sources checked
Wheel nut torque
140lb-ft190N·m
- As printed
- “Wheel Nut Torque 190 N·m 140 lb ft”
Cadillac Escalade lug nut torque by model year
Read on Cadillac’s own site on October 19, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.
How to tighten them
- Clean any dirt or rust off the studs, the nuts and the wheel’s mounting face. Don’t oil them unless the manual says to.
- Thread every nut on by hand until it seats against the wheel.
- Lower the vehicle so the tire takes its weight, and set a torque wrench to 140 lb-ft (190 N·m).
- Tighten the nuts in a star pattern, going around two or three times, until the wrench clicks on every nut.
- Check the torque again after a short drive if your manual says to.
More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Nuts or bolts, car by car: lug nuts vs wheel bolts.
Other Cadillac models
- Cadillac ATS100, 110 or 140 lb-ft, by year and version, 2013–2019
- Cadillac Celestiq140 lb-ft (190 N·m), 2025–2026
- Cadillac CT4100 or 140 lb-ft, by year and version, 2020–2026
- Cadillac CT5140 lb-ft (190 N·m), 2020–2026
- Cadillac CT6110 lb-ft (150 N·m), 2016–2020
- Cadillac CTS100, 110 or 140 lb-ft, by year and version, 2007–2019
- Cadillac DTS100 lb-ft (140 N·m), 2007–2011
- Cadillac ELR100 lb-ft (140 N·m), 2014–2016
- Cadillac Escalade ESV140 lb-ft (190 N·m), 2007–2014, 2022–2027
- Cadillac Escalade EXT140 lb-ft (190 N·m), 2007–2013
- Cadillac Escalade IQ140 lb-ft (190 N·m), 2025–2026
- Cadillac Escalade IQL140 lb-ft (190 N·m), 2026
- Cadillac Lyriq140 lb-ft (190 N·m), 2023–2027
- Cadillac Optiq140 lb-ft (190 N·m), 2025–2027
- Cadillac SRX100, 110 or 140 lb-ft, by model year, 2007–2016
- Cadillac STS100 lb-ft (140 N·m), 2007–2011
- Cadillac Vistiq140 lb-ft (190 N·m), 2026–2027
- Cadillac XLR100 lb-ft (140 N·m), 2007–2009
- Cadillac XT4140 lb-ft (190 N·m), 2019–2025
- Cadillac XT5140 lb-ft (190 N·m), 2017–2026
- Cadillac XT6140 lb-ft (190 N·m), 2020–2025
- Cadillac XTS110 lb-ft (150 N·m), 2013–2019
Questions
What is the lug nut torque on a Cadillac Escalade?
140 lb-ft (190 N·m), as printed in Cadillac’s owner’s manuals (2007–2027).
Can I use an impact wrench?
Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.
Should I oil the studs?
Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the stud further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.