Buick Cascada lug nut torque
The Buick Cascada takes 100 lb-ft (140 N·m) on its wheel nuts; the 2016–2019 manuals all say the same. Tighten them in a star pattern with a torque wrench.
Sources checked
Wheel nut torque
100lb-ft140N·m
- As printed
- “Wheel Nut Torque 140 N·m 100 lb ft”
Buick Cascada lug nut torque by model year
| Model year | Torque | Manual page |
|---|---|---|
| 2019 | 100 lb-ft (140 N·m) | Capacities and Specifications, PDF page 268 |
| 2018 | 100 lb-ft (140 N·m) | Capacities and Specifications, PDF page 265 |
| 2017 | 100 lb-ft (140 N·m) | Capacities and Specifications, PDF page 346 |
| 2016 | 100 lb-ft (140 N·m) | Capacities and Specifications, PDF page 345 |
Read on Buick’s own site on October 19, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.
How to tighten them
- Clean any dirt or rust off the studs, the nuts and the wheel’s mounting face. Don’t oil them unless the manual says to.
- Thread every nut on by hand until it seats against the wheel.
- Lower the vehicle so the tire takes its weight, and set a torque wrench to 100 lb-ft (140 N·m).
- Tighten the nuts in a star pattern, going around two or three times, until the wrench clicks on every nut.
- Check the torque again after a short drive if your manual says to.
More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Nuts or bolts, car by car: lug nuts vs wheel bolts.
Other Buick models
- Buick Enclave140 lb-ft (190 N·m), 2008–2027
- Buick Encore100 lb-ft (140 N·m), 2013–2022
- Buick Encore GX100 lb-ft (140 N·m), 2020–2026
- Buick Envision100 or 140 lb-ft, by model year, 2016–2026
- Buick Envista100 lb-ft (140 N·m), 2024–2026
- Buick LaCrosse100 or 110 lb-ft, by model year, 2007–2019
- Buick Lucerne100 lb-ft (140 N·m), 2007–2011
- Buick Rainier100 lb-ft (140 N·m), 2007
- Buick Regal100 or 110 lb-ft, by model year, 2011–2020
- Buick Rendezvous100 lb-ft (140 N·m), 2007
- Buick Terraza100 lb-ft (140 N·m), 2007
- Buick Verano100 lb-ft (140 N·m), 2012–2017
Questions
What is the lug nut torque on a Buick Cascada?
100 lb-ft (140 N·m), as printed in Buick’s owner’s manuals (2016–2019).
Can I use an impact wrench?
Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.
Should I oil the studs?
Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the stud further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.