Acura TLX lug nut torque

Acura TLX owner’s manuals give 94 lb-ft (127 N·m) for 2021–2025 and 80 lb-ft (108 N·m) for 2015–2020. Check which applies to yours. Tighten them in a star pattern with a torque wrench.

Sources checked

Wheel nut torque, 2021–2025

94lb-ft127N·m13kgf·m

04080120050100150ft-lbN·m
As printed
“Wheel nut torque: 94 lbf∙ft (127 N∙m, 13 kgf∙m)”
Source
2025 TLX Owner's Manual (Acura): If a Tire Goes Flat, PDF page 617

Acura TLX lug nut torque by model year

Model yearTorqueManual page
202594 lb-ft (127 N·m)If a Tire Goes Flat, PDF page 617
202494 lb-ft (127 N·m)If a Tire Goes Flat, PDF page 619
202394 lb-ft (127 N·m)If a Tire Goes Flat, PDF page 605
202294 lb-ft (127 N·m)If a Tire Goes Flat, PDF page 603
202194 lb-ft (127 N·m)If a Tire Goes Flat, PDF page 600
202080 lb-ft (108 N·m)If a Tire Goes Flat, PDF page 539
201980 lb-ft (108 N·m)If a Tire Goes Flat, PDF page 537
201880 lb-ft (108 N·m)If a Tire Goes Flat, PDF page 539
201780 lb-ft (108 N·m)If a Tire Goes Flat, PDF page 503
201680 lb-ft (108 N·m)If a Tire Goes Flat, PDF page 501
201580 lb-ft (108 N·m)If a Tire Goes Flat, PDF page 494

Read on Acura’s own site between October 21, 2026 and October 24, 2026. Years not listed haven’t been checked yet, or their manual prints no value; check your own manual.

How to tighten them

  1. Clean any dirt or rust off the studs, the nuts and the wheel’s mounting face. Don’t oil them unless the manual says to.
  2. Thread every nut on by hand until it seats against the wheel.
  3. Lower the vehicle so the tire takes its weight, and set a torque wrench to the value for your model year in the table above.
  4. Tighten the nuts in a star pattern, going around two or three times, until the wrench clicks on every nut.
  5. Check the torque again after a short drive if your manual says to.

What the Acura manual adds

  • Tighten the wheel nuts in the order indicated in the image.
  • Go around tightening the nuts two to three times in this order.
  • Do not over tighten the wheel nuts by applying extra torque using your foot or a pipe.

More detail, including how many passes to make: how to torque lug nuts. Setting and using the wrench: how to use a click torque wrench. Nuts or bolts, car by car: lug nuts vs wheel bolts.

Other Acura models

Questions

What is the lug nut torque on a Acura TLX?

94 lb-ft (127 N·m) for 2021–2025; 80 lb-ft (108 N·m) for 2015–2020, as printed in Acura’s owner’s manuals (2015–2025).

Can I use an impact wrench?

Not to finish. An impact wrench can’t set a torque and easily overshoots it, which stretches studs. Run the nuts down by hand or lightly, then finish with a torque wrench in a star pattern.

Should I oil the studs?

Not unless the manual says so. Torque values assume clean, dry threads; oil lets the same torque stretch the stud further. Some manuals, Kia’s and Mazda’s among them, say to keep oil and grease off wheel nuts and bolts altogether.